LEKA-CP-B-servo is a claw-type servo lock capping machine for special closure structures that need controlled lifting adjustment and more consistent tightening. It is suitable for projects where the cap structure requires sample review before final machine configuration.
Use this section to judge whether the machine fits your product, container, speed target, and line integration plan.
Suitable for cap structures that need claw-type locking or controlled tightening.
Servo adjustment helps improve control for special closure applications.
Machine setup can be reviewed according to real bottle and cap samples.
Can be configured for filling and capping line use after sample and layout review.
The template now displays the real compatibility fields from the equipment backend instead of only showing a generic labeling machine layout.
Bottles requiring controlled cap locking, special closure bottles, cosmetic bottles, chemical bottles and daily-use bottles.
Suitable for products using claw-type lock caps, selected special closures and selected screw caps after sample review.
Capping equipment
Cap type, bottle mouth, torque control, cap feeding method, and bottle stability should be confirmed with samples.
Screw Cap, Custom Cap
Custom Capping
Confirm according to special closure or screw cap samples.
Confirm according to bottle neck, closure structure and cap samples.
Configured according to bottle height samples and claw-type capping stroke.
Claw-type servo lock capping structure
Custom Cap Feeding
Servo-controlled locking action; final torque or locking consistency confirmed with cap samples.
Irregular Bottle
Values are shown from the equipment backend. Final configuration should be confirmed with product samples, container drawings, output target, and destination voltage.
This section uses the fields that were hidden in the old template, so buyers can understand not only the machine, but also daily operation and project support.
Changeover depends on bottle size, product format, and connected equipment.
Cleaning method can be confirmed according to product contact parts and production schedule.
Changeover should confirm cap locking structure, cap diameter, cap height, bottle neck size, bottle height and torque or locking consistency requirement.
Recommended spare parts can be prepared according to the final machine configuration.
Operator arrangement depends on automation level, product feeding, and line layout.
Safety configuration can be reviewed according to final machine layout and workshop requirements.
Custom cap handling, cap feeder, cap sorter, inline aluminum foil sealing machine, bottle positioning, labeling, coding and conveyor integration.
LEKA Pack Line supports each packaging project from early configuration review to after-sales follow-up. Before production, we help review the customer's product type, container samples, filling volume, output target, voltage, cap type, labeling method, automation level and factory layout, so the machine or full line configuration matches real production needs. Before shipment, we can support sample confirmation, factory testing, test videos, export document coordination and spare parts preparation. After the machine arrives, support includes installation and commissioning videos, operator guidance, remote video diagnosis, troubleshooting assistance, spare parts dispatch and after-sales follow-up. Each machine includes a one-year free replacement service for damaged non-consumable spare parts from the date the customer signs for receipt of the machine, excluding normal wear parts, consumables and damage caused by improper operation. When needed, on-site technical service can also be discussed according to the project situation.
This machine can be matched with upstream and downstream equipment according to your product, bottle, cap, label, output, and factory layout.
LEKA-BU is a bottle unscrambler and bottle receiving machine for feeding empty bottles into an automatic packaging line. The turntable uses variable-frequency stepless speed control so...
The LEKA-CE cap elevator is used to lift different cap types from the lower hopper to the cap collection or sorting section of an automatic capping...
LEKA-CW is an inline checkweigher for automatic weight detection, upper and lower limit judgment, and overweight or underweight rejection in packaging lines. It can be matched...
Servo Series
LEKA-CP-B-servo is a claw-type servo lock capping machine for special closure structures that need controlled lifting adjustment and more consistent tightening. It is suitable for projects where the cap structure requires sample review before final machine configuration.
Suitable for products using claw-type lock caps, selected special closures and selected screw caps after sample review.
| Machine Model | LEKA-CP-B-servo |
|---|---|
| Machine Type | Claw-type servo lock capping machine |
| Application | Controlled tightening or locking for selected special cap structures |
| Control System | PLC with touchscreen operation |
| Adjustment | Servo-controlled lifting adjustment |
| Configuration | Configured according to bottle and cap samples |
LEKA Pack Line can match this capping machine with filling, sealing, labeling, coding, conveyor and collection systems according to bottle samples, cap structure, output target and factory layout.
Please provide cap type, cap diameter, bottle mouth size, bottle height, cap feeding requirement, torque expectation, and bottle samples if available.
Suitability should be confirmed with your product type, container shape, size, cap or label requirement, output target, and factory layout. LEKA can review samples or drawings before quotation.
Yes. This equipment can be configured for line integration with filling, capping, labeling, coding, conveying, collection, and end-of-line packaging machines according to the project.
Please send product details, bottle or container photos, size drawings, target output, voltage, automation level, and the process you want to connect before and after this machine.
Yes. Custom options can be reviewed according to samples, required speed, product properties, container size, line direction, available workshop space, and budget.
LEKA engineers will review your product, bottle, cap, label, output, automation level, and factory layout, then recommend a suitable machine or complete line configuration.
Used to confirm the suitable machine structure.
Used to confirm compatibility and changeover details.
Used to configure output, motor power and line connection.
Used to plan conveyor direction and operator access.
