
Automatic Tube Filling and Sealing Machine
A tube filling machine fills a collapsible tube and closes the tail on the same pass. The public name for this equipment is an automatic tube filling and sealing machine. LEKA lists two models on this page, so the comparison stays in one place.
-
LEKA-GF01 — single line, about 30–55 tubes/min
-
LEKA-GF02 — dual automatic tube loading, about 60–110 tubes/min
Both run on 220V 50/60Hz. Plastic tubes and plastic-aluminum laminated tubes are closed with Swiss LEISTER hot air. Aluminum tubes are closed by crimping / fold sealing. Tube diameter is 13–50 mm and tube height is 80–220 mm. The stated speed on either model moves with the product, the fill volume, and the tube.
Bottle liquid filling machines and soft-tube filling-and-sealing machines are different families. Bottle and liquid projects stay with liquid filling machines for bottles.
Compare LEKA-GF01 and LEKA-GF02
Use the cards to open the spec block on this page.
| LEKA-GF01 | LEKA-GF02 | |
|---|---|---|
| Subtitle | Single line, about 30–55 tubes/min | Dual automatic tube loading, about 60–110 tubes/min |
| Structure | Single line. One color-mark sensor, one Swiss LEISTER heater, one blower | Two automatic tube-loading devices, two color-mark sensors, two Swiss LEISTER heaters, two blowers |
| Reference speed | About 30–55 tubes/min | About 60–110 tubes/min |
| Supply | 220V 50/60Hz | 220V 50/60Hz |
| Power | 4.5 kW | 7.5 kW |
| Weight | 850 kg | 1000 kg |
| Overall size | 1750 × 1280 × 1780 mm | 3500 × 1300 × 1780 mm |
| Tube loading | Automatic tube loading, single line | Two automatic tube-loading devices |
| Filling-range options | 5–20 ml, 10–70 ml, 15–150 ml, 20–200 ml, 30–300 ml, and 50–300 ml | 5–20 ml, 15–150 ml, 20–200 ml, and 30–300 ml |
| Air pressure | 0.4–0.6 MPa or 0.6–0.8 MPa | 0.4–0.6 MPa or 0.6–0.8 MPa |
| Tube size | 13–50 mm diameter, 80–220 mm height | 13–50 mm diameter, 80–220 mm height |
| Tail sealing | Hot air for plastic and laminated tubes. Crimp / fold for aluminum tubes | Hot air for plastic and laminated tubes. Crimp / fold for aluminum tubes |
| Contact parts | SUS304 | SUS304 |
| Controls | Delta HMI, Mitsubishi PLC, one Keyence color-mark sensor | Delta HMI, Mitsubishi PLC, two Keyence color-mark sensors, 1 Delta servo |
| Chiller | External 2 HP. Water 5–30°C adjustable | External 2 HP. Water 5–30°C adjustable |
Choose GF01 when a single line around 30–55 tubes/min fits the target. Choose GF02 when the line needs two automatic tube-loading devices and a target around 60–110 tubes/min. If the output band is still open, use the quote selector at the bottom and mark “not sure yet.”
The Delta, Mitsubishi, and Keyence names are the factory-fitted controls on the specification sheets. They are not a certification claim.
Gallery
Tube styles


Factory reference of standard tubes and R-corner tubes. The tube holder and the sealing mold are matched to the style.
Reference machines
LEKA-GF01 Single line

LEKA-GF02 Dual automatic tube loading


Modules



Process and tube materials
The machine orients the tube, fills it, and closes the tail before discharge. A color-mark sensor reads the print. Photoelectric sensing works with a pneumatic gate. Pneumatic filling doses the product through an anti-drip / anti-stringing nozzle. Pneumatic control valves run the motions. The product path can be adjusted and cleaned independently. Product-contact parts are SUS304. Operation is from the touchscreen.
Tail sealing by tube material
| Tube | Tail sealing |
|---|---|
| Plastic tubes | Swiss LEISTER hot air |
| Plastic-aluminum laminated tubes | Swiss LEISTER hot air |
| Aluminum tubes | Crimping / fold sealing |
Laminated tubes on this page are the plastic-aluminum tubes above. Hot air is the plastic and laminated configuration. Aluminum tubes use crimping / fold sealing. This page describes a tube filling and sealing machine, not a standalone tube sealer. The machines do not use ultrasonic sealing.
The holder and the sealing mold follow the tube diameter, the tube height, the end style (standard or R-corner), and the seal method. One mold set is not assumed to cover every tube.
Products
Typical products are cream, ointment, gel, lotion, toothpaste tubes, and other pastes in plastic or laminated tubes. Aluminum tubes are filled when the tail is crimped or fold-sealed.
Toothpaste on this page means toothpaste tubes. A pointed squeeze bottle with a screw cap is a bottle-capping project.
On a phone, swipe the table sideways.
| Paste or cream | Tube | Tail closing |
|---|---|---|
| Toothpaste tubes | Plastic or laminated toothpaste tube | Hot air. Aluminum toothpaste tubes use crimp / fold |
| Cosmetic cream tubes | Plastic or laminated tube | Hot air |
| Ointment tubes | Plastic, laminated, or aluminum tube | Hot air, or crimp / fold on aluminum |
| Gel tubes | Plastic or laminated tube | Hot air |
| Face cream, eye cream, and BB cream tubes | Plastic or laminated tube | Hot air |
| Hand cream and body lotion tubes | Plastic or laminated tube | Hot air |
| Hair gel and shaving cream tubes | Plastic, laminated, or aluminum tube | Hot air, or crimp / fold on aluminum |
| Hair color cream tubes | Plastic or laminated tube | Hot air |
| Facial cleanser tubes | Plastic or laminated tube | Hot air |
| Sunscreen tubes | Plastic or laminated tube | Hot air |
| Pharmaceutical ointment tubes | Tube sample required | Matched after the paste and the tube are checked |
| Grease tubes | Usually an aluminum tube | Crimp / fold after the paste is checked |
| Silicone tubes | Tube sample required | Matched after the paste and the tube are checked |
| Paint tubes | Tube sample required | Matched after the paste and the tube are checked |
Cosmetic cream, gel, and lotion belong here when the container is a tube. Send a sample when the paste is thick, stringy, or aerated.
What the sample needs to show
- Product type and how it flows
- Tube material and a sample tube or drawing
- Fill volume
- Target tubes per minute
- Standard tube or R-corner tube
- Workshop voltage, air supply, and floor space
LEKA-GF01 Automatic Tube Filling and Sealing Machine
single line, about 30–55 tubes/min

LEKA-GF01 is the single line model on this tube filling machine page. The factory sheet rates it at about 30–55 tubes/min. The rate varies by product, fill volume, and tube size. Supply is 220V 50/60Hz. Power is 4.5 kW. Weight is 850 kg. Overall size is 1750 × 1280 × 1780 mm.
The line uses one color-mark sensor, one Swiss LEISTER heater, and one blower. Plastic and laminated tubes are closed with that hot-air heater. Aluminum tubes are closed by crimping / fold sealing. Filling is pneumatic, through an anti-drip / anti-stringing nozzle. Product-contact parts are SUS304. Photoelectric sensing works with a pneumatic gate, and pneumatic control valves run the motions. The product path can be adjusted and cleaned independently.
LEKA-GF01 includes automatic tube loading on a single line. Dual automatic tube loading, with two loading devices, is on LEKA-GF02.
GF01 production
| Item | Specification |
|---|---|
| Reference speed | About 30–55 tubes/min. The rate moves with the product, the fill volume, and the tube |
| HMI | 1, Delta |
| PLC | 1, Mitsubishi |
| Color-mark sensor | 1, Keyence |
| Heater | 1, Swiss LEISTER hot air |
| Blower | 1 |
| Tube loading | Automatic tube loading |
| Filling | Pneumatic filling, set with the product |
| Filling nozzle | Anti-drip / anti-stringing |
GF01 filling-range options
LEKA-GF01 is built to one of these fill-range groups. The group follows the fill volume.
| Fill-range group | Ranges |
|---|---|
| Group 1 | 5–20 ml, 10–70 ml, 15–150 ml, 20–200 ml, 30–300 ml |
| Group 2 | 10–70 ml, 30–150 ml, 50–300 ml |
GF01 frame and utilities
| Item | Specification |
|---|---|
| Overall size | 1750 × 1280 × 1780 mm |
| Weight | 850 kg |
| Supply | 220V 50/60Hz |
| Power | 4.5 kW |
| Air pressure | 0.4–0.6 MPa or 0.6–0.8 MPa |
| Ambient | 5–38°C |
| Chiller | External 2 HP, water 5–30°C adjustable |
| Tube diameter | 13–50 mm |
| Tube height | 80–220 mm |
Maximum sealing diameter is 50 mm and maximum tube length is 220 mm. Holders and molds change with the diameter, the height, the end style, and the seal method.
Fitted controls are a Delta HMI, a Mitsubishi PLC, and one Keyence color-mark sensor, together with an inverter, motor, blower, indexer, pneumatic parts, the LEISTER heater, and relays. Swiss LEISTER hot air closes plastic and laminated tails.
LEKA-GF02 Automatic Tube Filling and Sealing Machine
dual automatic tube loading, about 60–110 tubes/min

LEKA-GF02 is the higher-output model on this page. The factory sheet rates it at about 60–110 tubes/min. The rate varies by product, fill volume, and tube size. The configuration lists two automatic tube-loading devices, two Swiss LEISTER heaters, two color-mark sensors, and two blowers. That hardware is the GF02 difference. Filling stays pneumatic. The single line model is LEKA-GF01.
Supply is 220V 50/60Hz. Power is 7.5 kW. Weight is 1000 kg. Overall size is 3500 × 1300 × 1780 mm.
Plastic tubes and plastic-aluminum laminated tubes are closed with the LEISTER hot-air heaters. Aluminum tubes are closed by crimping / fold sealing. Filling is pneumatic, through an anti-drip / anti-stringing nozzle. Product-contact parts are SUS304. The same sensing, pneumatic gate, pneumatic valves, and independent product path described above apply on this model. The reference photos show two hoppers feeding a rotary holder table.
GF02 production
| Item | Specification |
|---|---|
| Reference speed | About 60–110 tubes/min. The rate moves with the product, the fill volume, and the tube |
| Automatic tube-loading devices | 2 |
| HMI | 1, Delta |
| PLC | 1, Mitsubishi |
| Color-mark sensors | 2, Keyence |
| Servo | 1, Delta |
| Heaters | 2, Swiss LEISTER hot air |
| Blowers | 2 |
| Filling | Pneumatic filling, set with the product |
| Filling nozzle | Anti-drip / anti-stringing |
GF02 filling-range options
LEKA-GF02 is built to one of these fill-range groups. The group follows the fill volume.
| Listed options |
|---|
| 5–20 ml |
| 15–150 ml |
| 20–200 ml |
| 30–300 ml |
GF02 frame and utilities
| Item | Specification |
|---|---|
| Overall size | 3500 × 1300 × 1780 mm |
| Weight | 1000 kg |
| Supply | 220V 50/60Hz |
| Power | 7.5 kW |
| Air pressure | 0.4–0.6 MPa or 0.6–0.8 MPa |
| Ambient | 5–38°C |
| Chiller | External 2 HP, water 5–30°C adjustable |
| Tube diameter | 13–50 mm |
| Tube height | 80–220 mm |
Plan floor space for 3500 × 1300 × 1780 mm plus the chiller and the product feeder. The two tube-loading devices are set to the tube. Mold sets follow the tube diameter, the end style, and the seal method.
Fitted controls are a Delta HMI, a Mitsubishi PLC, two Keyence color-mark sensors, and a Delta servo, together with an inverter, motors, two blowers, an indexer, pneumatic parts, two LEISTER heaters, relays, and two automatic tube-loading devices. Swiss LEISTER hot air closes plastic and laminated tails.
Accessories
These three items are modules quoted with the tube filling machine. They are tube-filler tooling and utilities. They are not bottle-mouth foil sealers, and they are not carton tape sealers.

Chiller
Both models use an external 2 HP chiller. Water temperature is adjustable from 5–30°C. The cabinet beside the frame is that chiller.

Sealing molds and tube holders
White tube holders and metal mold parts are matched to diameter, tube style, and seal method. Hot-air molds serve plastic and laminated tubes. Crimp / fold tooling serves aluminum tubes. Standard tubes and R-corner tubes need holders that match that shoulder.

Product feeder
Stainless product feeder with a vertical outlet, a flexible hose, and pneumatic fittings. It refills the filler. Hopper volume and hose length follow the product and the speed.
Common questions
What does this tube filling machine do?
It places the tube, reads the color mark, fills by pneumatic dosing through an anti-drip / anti-stringing nozzle, closes the tail, and discharges the tube. Photoelectric sensing works with a pneumatic gate. Plastic and laminated tails use Swiss LEISTER hot air. Aluminum tails use crimping / fold sealing.
Which model matches a target speed?
LEKA-GF01 is the single line, about 30–55 tubes/min. LEKA-GF02 is the dual automatic tube-loading model, about 60–110 tubes/min. The working rate follows the product, the fill volume, and the tube size.
How are the tails sealed?
Plastic tubes and plastic-aluminum laminated tubes use Swiss LEISTER hot-air tail sealing. Aluminum tubes use crimping / fold sealing. The seal method follows the tube material. Standard tubes and R-corner tubes both appear in the factory style photo. The mold and holder are matched to the sample.
Is this a tube sealer? Does it use ultrasonic sealing?
No. This is an automatic tube filling and sealing machine: it fills the tube and closes the tail on the same pass. It is not a standalone tube sealer. Tails are closed with Swiss LEISTER hot air or by crimping / fold sealing. Ultrasonic sealing is not used.
Does LEKA-GF01 load tubes automatically?
Yes. LEKA-GF01 includes automatic tube loading on a single line. Dual automatic tube loading, with two loading devices, is on LEKA-GF02.
What size and air supply should I plan for?
LEKA-GF01 is 1750 × 1280 × 1780 mm and 850 kg. LEKA-GF02 is 3500 × 1300 × 1780 mm and 1000 kg. Air supply for both models is 0.4–0.6 MPa or 0.6–0.8 MPa. Leave floor space for the chiller and the product feeder.
Which filling volumes are available?
The range follows the fill volume. LEKA-GF01 is built to one of two groups: 5–20 ml, 10–70 ml, 15–150 ml, 20–200 ml, and 30–300 ml, or 10–70 ml, 30–150 ml, and 50–300 ml. LEKA-GF02 ranges are 5–20 ml, 15–150 ml, 20–200 ml, and 30–300 ml.
Can it fill toothpaste tubes?
Yes, when the container is a toothpaste tube inside the 13–50 mm diameter and 80–220 mm height window, and the seal method matches the tube. Plastic and laminated toothpaste tubes use hot air. Aluminum toothpaste tubes use crimp / fold sealing. Send the tube and the paste with the target speed.
How is this different from a bottle filler?
Bottle liquid filling machines and soft-tube filling-and-sealing machines are different families. A bottle project still needs a bottle filler, then a cap, and sometimes foil sealing and a label. This machine fills and tail-seals a tube. Start bottle projects at the liquid filling machines page. Tube labeling is a separate machine.
What should I send for a price?
The price follows the model, the fill range, the tube and seal tooling, the chiller, the product feeder, and the loading setup. Send the product, a tube sample or drawing, the fill volume, the target tubes per minute, and the workshop layout.
What else should I include with the inquiry?
Add a filling-accuracy target, the number of operators, or a date coder when the line needs them.
Can pharmaceutical, grease, silicone, or paint tubes run here?
Send the sample, the tube material, and the fill volume. These pastes are checked against the tube before a machine is recommended.
Get a project quote
Tell us which model to quote. The three choices below open the same project form. The website team should store the selected label with the inquiry: GF01, GF02, or not sure yet.
Send the product, the tube, the fill volume, the target speed, and the workshop layout. Say whether the tube is plastic, laminated, or aluminum, and whether it is a standard tube or an R-corner tube.