Packaging Line Project Support sales@lekapackline.com
Start Your Project
LEKA Pack Line Get Quote
LEKA complete liquid bottle filling, capping, sealing and conveying line during factory testing Complete line capability Plan the machine around your product, container and output
Detergent bottle filling line reference Line planning Connect filling, capping, labeling and conveying

Need a Custom Match?

Tell us the product viscosity, container, cap, label and target output. We will help match the line configuration.

Browse Applications
Discuss Your Product

Packaging Line Case Studies

See how filling and packaging configurations are matched to different products and containers.

View All Case Studies
Complete razor lubricant filling and packaging line during factory testing Lubricant packaging Razor Lubricant PET Bottle Filling Line View project details → Double-head semi-automatic filling machine for Japanese sauces Small-batch sauce Semi-Automatic Sauce Filling Machine View project details → LEKA 5 to 12 litre jerrycan filling and capping line reference Large containers 5–12 L Jerrycan Filling & Capping Line View project details →

Project Support

Share your product, container and output requirements to receive machine selection support.

Contact LEKA

About LEKA Pack Line

LEKA Pack Line supplies filling, capping, labeling and conveying equipment, as well as complete packaging line solutions.

Equipment Scope Filling, capping, labeling, conveying and packaging support equipment.
Complete Line Capability Single machines or integrated bottle packaging lines.
Project Matching Configured around product, container, cap, output and factory layout.
Factory & Project Support Factory testing, project communication and after-sales support.
Meet LEKA Contact an Engineer
Aerial view of the LEKA PACK factory building and surrounding industrial area
LK-818 metal detector and LK-XP210 checkweigher with a tea pouch moving onto the weigh belt
MD + checkweigher LK-910K-XP210

LK Metal Detector Checkweigher Combo for Packaging

LEKA Pack Line (lekapackline.com) LK-910K-XP210 combines conveyor metal detection and online checkweighing on one footprint for packs up to ≤1.5 kg on packaging lines. Catalog accuracy bands and empty-machine MD references are not rated or guaranteed; confirm under your product and line during project review.

One footprint for metal detection and weight check≤1.5 kg weigh range with ±0.2–±0.5 g catalog accuracy bandCustomizable reject collection for off-metal and off-weight packs
Get a quote WhatsApp +86 18126903504
On the packaging line

Where it sits

Useful on retrofit lines that lack space for two separate machines after filling. Compare separate checkweigher and conveyor metal detector pages when stages must be split.

Boundary: This combination is for metal + weight on one line. It is not a foil-only detector, not an X-ray, and not a multihead weigher.
About LEKA Pack Line / catalog references

LEKA Pack Line (lekapackline.com) supplies the LK-910K-XP210 metal detector + checkweigher combination for space-limited packaging lines. Catalog checkweigher band ±0.2–±0.5 g; MD sensitivity is empty-machine reference and not rated or guaranteed. Confirm dual-reject layout and line integration during project review.

Machine options

Models

Compare catalog reference bands first, then confirm with your product, speed and line layout.

LK-910K-XP210 metal detector and checkweigher combination, product view with dual screens and reject bins
LK-910K-XP210

LK-910K-XP210

One frame with a 910K-class touch-screen metal detector and a checkweigher section. The weigh section matches standalone LK-XP210. Use this sensitivity table, not the standalone LK-910K table.

Ask about LK-910K-XP210
Empty-machine sphere, mm
mm H100120150200250300350
Fe0.70.81.01.21.52.02.5
Non-Fe1.01.21.51.82.02.53.0
3041.21.51.82.02.53.03.5
Metal-detector speed25–30 m/min, adjustable
Weigh range≤1.5 kg
Minimum division0.1 g
Weigh accuracy±0.2 g to ±0.5 g
Weigh belt speed15–100 m/min
Belt width210 mm, custom available
Weigh belt400(L) × 210(W) mm
Piece size≤300(L) × 200(W) mm
Aperture height100–200 mm, custom available
Size2200(L) × 560(W) × 1280(H) mm
PowerAC 220 V, 50 Hz, about 200 W
RejectPusher, flap, or air blow. The mechanism is selected for the pack.

Empty-machine sphere diameter. Product, salt, water, frozen product, and where the metal sits in the pack change the result. Minimum division is not the accuracy.

LK-910K-XP210 metal detector and checkweigher combination, product view 910-210-1LK-910K-XP210 metal detector and checkweigher combination, product view 910-210-2LK-910K-XP210 metal detector and checkweigher combination, product view 910-210-3
What metal detection finds

Detectable metals

The metal-detector half of the combo targets metallic contaminants (Fe / SUS). Weight check is separate. Non-metal foreign bodies need X-ray, not this MD channel.

iron / Fe foreign-body catalog reference
Iron
SUS (stainless steel) foreign-body catalog reference
SUS

Catalog reference images. Empty-machine MD Fe/Non-Fe/SUS references on this page are theoretical no-product figures — actual performance depends on product, packaging, and line conditions and is confirmed during project review.

Decision Table

Models at a glance

Swipe to see full table →

ModelWeigh rangeAccuracy (catalog)SpeedReject
LK-910K-XP210≤1.5 kg±0.2–±0.5 g (catalog; empty-machine band)Metal detector 25–30 m/min; weigh belt 15–100 m/minOptional / customized
MD sensitivity, belt, power & size

Combo sensitivity, weigh range ≤1.5 kg, accuracy ±0.2 g to ±0.5 g, belt width 210 mm, and power about 200 W are on the LK-910K-XP210 card. Use the combo sensitivity table, not the standalone LK-910K table. Size 2200×560×1280 mm.

Catalog reference figures only — not rated or guaranteed values. Actual results depend on product, speed and environment and are confirmed during project review.

Empty-machine (no-product) reference sensitivity figures are theoretical references without product effect; actual detectable size depends on product, packaging, and line conditions and is confirmed during project review. Accuracy bands are catalog reference ranges. Actual results depend on product shape, belt speed, vibration, and environment, and are confirmed during project review.

Related

Looking for a different inspection machine?

Online checkweigher & combination weigherConveyor metal detectorAluminum foil metal detectorGravity metal separatorFood X-ray inspection

← Back to weighing & inspection machines

Also see: complete liquid filling line

FAQ

Frequently asked questions

What does an MD + checkweigher combo do on one line?

LK-910K-XP210 combines conveyor metal detection and online checkweighing on one footprint so off-metal and off-weight packs can be rejected without two separate machines. Reject arrangement is optional / customized.

What accuracy band should I use for LK-910K-XP210?

Use the catalog parameter-table accuracy band of ±0.2–±0.5 g for ≤1.5 kg. Confirm with your product during project review.

Can I treat empty-machine sensitivity figures as on-product performance?

Empty-machine (no-product) reference sensitivity figures are theoretical references without product effect; actual detectable size depends on product, packaging, and line conditions and is confirmed during project review.

Request a configuration

Send project details for a configuration review

Email sales@lekapackline.com or WhatsApp +86 18126903504.

Get a quote WhatsApp +86 18126903504

Include these details

  • product form
  • packaging material (foil / metal lid / zipper?)
  • piece size & weight range
  • target speed
  • what to detect or check
  • voltage & destination country
  • new line or retrofit (line speed, belt height, left/right discharge)
  • photo or sketch
  • existing equipment brand
  • report / batch traceability need
  • reject preference
  • planned quantity
  • separate reject collection
  • PLC / interlock
  • line height and left/right flow