Sealing head over capped bottles
The induction head sits above the conveyor while capped clear bottles pass under it.
See the equipment in operation, review the available test details, and use the project links below to plan a suitable packaging configuration.
This factory test shows the LEKA-GLF-4000 water-cooled aluminum foil sealing head over capped clear bottles on a short conveyor. The operator places the bottles, the sealing head passes the caps, and the operator then lifts a bottle to check the cap.
This 39-second clip does not measure bottles per hour, bottle-mouth diameter, foil liner, or cooling-water temperature.
The induction head sits above the conveyor while capped clear bottles pass under it.
The operator lifts a bottle and checks the cap after it leaves the sealing head.
Hoses are connected to the stainless sealing cabinet during the test.
Discuss product trials, sample testing, acceptance criteria, and commissioning support before your equipment is prepared for shipment.
This video shows the control setup and test-cycle activation of a single-head semi-automatic liquid filling machine. It is provided as an operating reference for…
Watch Video
This short demonstration shows the LEKA-FLsemi-L01 complete machine and its mixing-hopper agitator operating with the hopper empty. The matching equipment configuration uses an 80…
Watch VideoShare your product characteristics, bottle or container dimensions, cap type, label method, required capacity, factory layout, and local voltage. LEKA Pack Line can propose a single machine or an integrated packaging line.