Packaging Line Project

Hydrochloric Acid Anti-Corrosion Filling Line

This page records application footage of anti-corrosion filling. The bottles in the main film are labeled haohua 36% hydrochloric acid.

The main film is the hydrochloric acid clip. Two other films are related application footage only. One is a four-head anti-corrosion filler with inline capping that fills 36% hydrochloric acid into 5 L square jerry cans, at 48 bottles per minute. The other is a small-bottle filling and capping line with a ten-head full polypropylene filler and a dual-head inline capper; the liquid is not named in that film, and it is not bleach.

Films on this page
Film Page
Main hydrochloric acid clip Hydrochloric acid filling demo
Four-head filler, 5 L cans Four-head filler and inline capper
Small-bottle line, liquid not named Small-bottle filling and capping line
Series pages with other head counts
Head count Page
Two-head LEKA-FLFF-02-A two-head page
Ten-head LEKA-FLFF-10-B ten-head page
Ten-head line LEKA-FLFFX-10-B ten-head line page
Single-head LEKA-FLDT-XKJ01 single-head page

The table below shows what the footage shows and what to send with an inquiry.

What this footage supports
Item On this page
Liquid The bottle label reads 36% hydrochloric acid. Send the product SDS with the inquiry.
Container The related four-head clip fills 5 L square jerry cans. Send the bottle size from the main clip.
Cap Send a cap sample or drawing.
Output The 5 L clip runs at 48 bottles per minute. Send your target output.
Later modules Capping appears on the related clips. Foil sealing, label side and coding are confirmed when the pack requires them.
Power and air Send the factory voltage and compressed air.
Product
Hydrochloric acid, 36%, as printed on the bottle label in the footage
Chemical & Lubricant

Project Overview

Key project data for equipment selection and line planning.

Product
Hydrochloric acid, 36%, as printed on the bottle label in the footage

Related Equipment Demonstrations

The four-head 5 L film and the small-bottle film. Each one is separate from the main clip above.

36% Hydrochloric Acid Filling and Capping for 5 L Jerry Cans

Four heads fill 5 L square jerry cans of 36% hydrochloric acid. Four cans every 5 seconds, 48 bottles per minute. Caps are closed by the LEKA-CP-D three-jaw capper.

Ten-Head Full-PP Anti-Corrosion Filling and Capping Machine

Ten filling heads and a full polypropylene body, with a dual-head inline capper on small bottles. The liquid is not named in this film.

Operation, Changeover and Site Requirements

Information used to plan cleaning, package changeover, utilities and installation.

Materials, Cleaning and Safety

Seal, hose, and wetted-part compatibility, plus the cleaning method, are confirmed from the product SDS and a filled-bottle sample before a machine is selected.

Changeover and Optional Equipment

Changeover parts and optional equipment are confirmed from the product, container, cap, and the product SDS.

Need a Packaging Line Configured for Your Product?

Send your product, container, cap, label, filling volume and target output. LEKA Pack Line will review the details before recommending a practical machine configuration.

Request a Line Proposal