Chuck capping machine LEKA-CP-D-servo

LEKA-CP-D-servo Chuck Capping Machine — Servo Chuck Capper for Pump & Irregular Caps

Automatic inline chuck capping machine with servo chuck control for pump dispensers, trigger sprayers, and irregular closures — confirm fit with a sample review before you buy.

LEKA Pack Line (lekapackline.com) supplies the LEKA-CP-D-servo automatic servo chuck capping machine for pump dispensers and irregular / screw caps (Ø30–60 mm).

Output: 2200–3000 BPH Cap Ø 30–60 mm Bottle W 35–120 mm Sample fit review
Interest

Built for pump & irregular closures

For cosmetics, personal care, detergent and selected chemical bottles where standard four-wheel cappers struggle with pump dispensers or irregular caps. Chuck jaws grip the closure; servo rotation and lift handle tightening and travel.

01

Three-jaw servo chuck

Jaws grip and rotate the cap. Optional custom two-jaw or one-third sector jaws after sample review.

02

Adjustable clamp width

Side-belt clamping with manual width adjustment for bottle widths 35–120 mm.

03

Adjustable servo tightening

Servo chuck torque is adjustable and set with your bottle and cap samples (no fixed Nm published).

04

Delta 7″ HMI

Delta 7-inch touchscreen with Xinjie PLC; Xinjie HMI optional on request.

05

Recessed FRL

Oil-water separator / FRL is recessed in the cabinet to help avoid impact damage.

06

Line-ready options

Cap elevator/feeder, foil sealing, labeling, coding and conveyor can be planned after layout review.

Photos

Machine views

Front, angle, chuck, HMI, clamp and FRL views.

LEKA-CP-D-servo automatic servo chuck capping machine front view LEKA-CP-D-servo front studio view with dual chuck heads LEKA-CP-D-servo three-quarter studio view Three-jaw servo chuck close-up Delta HMI with servo chuck and lift Bottle clamp width adjustment Recessed oil-water separator / FRL LEKA-CP-D-servo alternate front studio view
Desire

Specs that matter for a quote

Figures below are from the current configuration sheet. Final settings are confirmed with samples.

ModelLEKA-CP-D-servo
Capping speed2200–3000 BPH (reference; depends on cap, chuck setup and bottle stability)
Cap diameter30–60 mm
Bottle height50–350 mm
Bottle width35–120 mm (side-belt clamp)
Capping structureServo chuck (three-jaw; optional custom jaws)
Tightening torqueAdjustable (servo) — set with samples
Chuck / clamp driveXinjie servo chuck; Yongkun 3-phase bottle-clamp motor
HMI / PLCDelta 7-inch (Xinjie optional); Xinjie PLC
Dimensions (L×W×H)200 × 95 × 165 cm
Weight150 kg
Compliance upgradesCE / CSA / UL and other regional electrical / safety configurations available on request

Pump dispensers

Pump closures that need a chuck grip instead of wheel friction alone.

Irregular caps

Specialty / irregular shapes reviewed and confirmed with samples.

Screw caps

Standard screw caps within the diameter and bottle ranges above.

Sample fit review — what to send

We run a trial with photos and video before quotation so chuck jaws, clamp width and tightening can be checked on your parts.

  • Bottle samples or drawings (diameter, height, neck finish)
  • Cap samples or drawings (pump / irregular / screw; diameter; height)
  • Target capacity and factory voltage
  • Factory layout or available space (optional but helpful)
Optional accessories

Cap feeder and aluminum foil sealing

These modules can be planned with LEKA-CP-D-servo after layout and sample review for cap supply and foil sealing.

LEKA vibratory cap feeder bowl with bottle caps on spiral track
Vibratory Cap Feeder

Vibratory bowl cap feeder

Orients bulk caps in a vibratory bowl and feeds the track for automatic supply before chuck capping. Catalog window Ø30–60 mm — confirm pairing with LEKA-CP-D-servo after sample review.

View Vibratory Cap Feeder
LEKA-GLF-1900 air-cooled aluminum foil sealing machine
LEKA-GLF-1900

Air-cooled aluminum foil sealing

Non-contact induction sealing for plastic and composite mouths; sealing ranges 15–60 mm and 40–120 mm (confirm with samples), up to 12,000 BPH reference.

View LEKA-GLF-1900
LEKA-GLF-4000 water-cooled aluminum foil sealing machine
LEKA-GLF-4000

Water-cooled aluminum foil sealing

High-speed water-cooled inline foil sealing for continuous lines, covering the same plastic and composite mouth ranges as the air-cooled model.

View LEKA-GLF-4000
Action

Request a sample review or project quote

Share bottle and cap details once — we confirm fit, then quote the chuck configuration that matches your line.

Need to send

  • Bottle size & neck finish
  • Cap type (pump / irregular / screw)
  • Target output (BPH)
  • Factory voltage & layout notes
FAQ

Quick answers

Is LEKA-CP-D-servo for pump and irregular caps?

Yes. It is positioned for irregular caps and pump dispensers as well as standard screw caps in the 30–60 mm range — always confirm with a sample review.

Do you publish a fixed torque (Nm)?

No. Servo chuck tightening is adjustable and set with your bottle and cap samples. We do not publish a fixed Nm figure.

What speed should I plan for?

Reference range is 2200–3000 bottles/hour. Actual output depends on cap structure, chuck setup, bottle stability and feeding method.

Can it join a filling and labeling line?

Yes. Cap feeding, foil sealing, labeling, coding and conveyors can be planned after layout and sample review.